Racing your nitro RC on the street or even off-road takes its toll on the nitro engine's air filter from dirt and other debris that get inside and reduce the performance of your nitro engine. Cleaning the air filter is part of the maintenance needed to keep your RC at optimal performance.
Cleaning the air filter You will need:
Remove the air filter from your nitro engine's carburetor by twisting slightly and pulling it off. Be careful to not damage the inlet to the carburetor.
Disassemble the air filter. Separate all parts, including removing the foam insert -- the filter HOLDS the dirt and debris caught in it.
Wash all the parts thoroughly in the soapy water or ( fuel only No Soap) -- and the screen which helps the filter catch most of the dirt and debris
A) After you've washed the parts thoroughly, rinse each part under running water Be sure to rinse all the soap from the foam insert and squeeze out excess water.
B) (If using fuel squeeze out excess fuel Do not use water and towel Dry).
Once the parts are thoroughly dry, apply about 25 to 30 or 40 to 50 drops of air filter oil to face of the foam insert.
Remember use our oil will give your fuel system conditioning through the air filter
Buy the #1 oil RC now click here After Run oil here